Ediabas Obd2 Driver Download

  

BMW Tools Package Digital Software: INPA 5.06 - EDIABAS 7.3.0 - NCS Expert Dummy - Windows Drivers - Install GuideBMW Tools Package Digital Software Download: INPA 5.06 - EDIABAS 7.3.0 - NCS Expert Dummy - Windows Drivers - Install Guide. Here you can download driver for INPA EDIABAS interface.

You can download BMW INPA 5.0.2 (last version, includes NCSExpert and WinKFP) software here: http://down.uobdii.com/bmw-inpa-502.zip (this set is fully tested by me).

Unpack INPA and run Programminstallation/setup.exe

1. Choose language:

4. Next step:
5. Next step:
6. Next step:
7. Next step:
8. Next step:
9. Next step:
10. Next step:
11. Next step:
12. Next step (select STD:OBD even if you have DCAN cable) :
13. Next step (select COM port that your cable plugged in):
14. Next step:
15. Next step (click “skip” 3 times):
16. Next step:
17. Next step (restart your computer):

And now,UOD2.NET engineer NOTICE:BMW INPA instruction complete

Save

UOBDII Official Blog All rights reserved BMW INPA Ediabas software and setup instruction

Ediabas Ini

Related posts:

BMW K-CAN D-CAN OBD2 Interface BMW Tools Driver & Software Installation Guide
OBD Innovations·Thursday, July 7, 2016·Reading time: 4 minutes
  • OS: Microsoft Windows XP/7 (32/64bit) 8/8.1, 10 (32/64bit)
  • CD/DVD ROM Drive
  • 1 Available USB Port (We recommend using the same USB port each time)
  • Minimum 1.2GHz Processor
  • Minimum 2GB of RAM
  • Basic/Intermediate experience with navigating Windows and installing software/drivers
Download
FTDI Driver Note: The FTDI Windows XP/7 32bit drivers are included in the setup file and are automatically installed after the software installed. If you need the correct FTDI drivers for Windows 7 (64bit), Windows 8/8.1, please download the driver setup file from FTDI HEREBMW Tools that will be installed:
  • INPA 5.06 (English)
  • EDIABAS 7.3.0
  • NCS Expert 4.0.1
  • NCS Dummy 0.6.04
  • Tool32 4.03
  • WinKFP 5.3.1
  • BMW Coding Tool v2.5.0 (alternative to NCS Dummy or updating DATEN files)
  • Integrated SP-DATEN v53.3
BMW Models Supported: E31, E34, E36, E38, E46, E52, E53, E60, E65, E70, E85, E87, E90, F01, F02, F07, F010, F011, F025, F30
1. Place the disc in your computer and view the contents of the disc. Click on the 'Setup' file. Click Next, Next and Install to proceed with the installation.
2. Allow several minutes for the installation to complete. Towards the end of the installation, the FTDI drivers will automatically install. Windows may prompt you for permission to proceed. Click Yes. The Device Driver Installation Wizard will pop up. Click Next and accept the license agreement to complete the installation of the FTDI Drivers. Now back to the software installation wizard box, click Finish.
Obd2Obd2 driver windows 7
3. The only thing needed to do is to configure your BMW K-CAN D-CAN USB Cable. During the installation, the drivers for the cable were installed. Now plug it in your USB port and Windows should recognize it and begin installing it.If Windows did not recognize the cable or could not find the correct drivers, see the Troubleshooting section below.

Elm 327 Usb Obd2 Driver

4. Now we need to make sure the cable is using the right port number on your PC
  • Go to the 'Control Panel' (Start > Control Panel)
  • Click on 'System' (If System isn't shown, see the top right of the control panel and change the view to Large Icons)
  • Click 'Device Manager' in System
  • Expand the Ports (COM & LPT) in device manager and look for 'USB Serial Port (COM X)'
    • X = the default COM port Windows assigned for the cable. We will need to change this to COM 1 in order for it to function properly.
  • Right click on 'USB Serial Port (COM X)' and click on 'Properties'. Go to the 'Port Settings' tab, then click'Advanced...'
  • Change the 'COM Port Number' to COM1
  • Change the 'Latency Timer (msec)' to 1
  • Now click OK. If you get a warning that COM1 is being used by another device, click YES and continue to exit out of both windows
5. Test if the Port has been configured correctly. Unplug the USB cable and plug it back into the same port. Navigate to theDevice Manager, Ports (COM & LPT) and you should see 'USB Serial Port (COM1). This means you have successfully installed the Drivers and configured the port.6. Connecting the BMW K-CAN D-CAN Cable to your vehicle: Plug the interface into your car's OBDII port and turn on the ignition. Now start the INPA software from your Desktop shortcut.
If the INPA software detects your vehicle successfully, you will see 2 SOLID Black dots next to 'Battery' and 'Ignition' headings. After using INPA to test the connection from your car and interface, you can proceed to using the other BMW tools in this package.
Troubleshooting: If Windows did not recognize the cable or could not find the correct drivers, which is sometimes the case for Windows 7 64-bit or Windows 8/8.1 systems, then you need to install the correct FTDI drivers for your operating system. On the disc, open the FTDI Drivers folder and run the installer. It will automatically detect and install the correct drivers for your computer. Continue from Step 4 of the guide.